The Air Conditioner system is equipment that is subject to failure on the hottest day of the year in OK. This is the day the system is working hard and taxing the parts subject to failure because of age. The best way to prevent this from happening is to have a pre-season check-up. Problems with the system can be identified at this time and fixed before they function to the breaking point. AC Repair in Edmond OK technicians can perform this check-up.
* Many moving and stationary parts are used to the point of failing. An annual check-up will identify these parts.
* All moving parts should be lubricated to protect the life of the part and decrease the amount of electricity you use.
* Faulty electrical parts or unsecured connections can be unsafe and increase the amount of electricity used.
* Check the thermostat settings for the proper start and shut-off times.
* The evaporator and all of the coils should be cleaned. The system will run longer when these parts are dirty. This condition will cause more wear on the system and increase energy costs. The life of the parts will also be reduced.
* The refrigerant level should be checked. The life of the equipment will be reduced when the refrigerant level is too low and the cooling capability will be greatly reduced.
* The blower components should be cleaned and adjusted. The blower cage or housing should be cleaned. The belts should be adjusted so the fan can blow the air into the living quarters with enough energy to cool the rooms. Airflow problems can greatly reduce the cooling efficiency of the system.
The airflow to the vents should be checked to see if the air is being distributed equally to each vent and in the proper amount. The vents may be open but the duct work may not be adequate to disburse the air. The filter may need to be changed. The equipment may be undersized, or it may be just too old to do the job. website can assess the condition of your equipment and make recommendations on how to better cool your home. The EPA believes that your air conditioning loses 5% of its cooling capability which is reduced by the lack coil cleaning.
